TM 5-2420-230-24-1
b. Installation.
Steps in installation of the desiccant cartridge are the reverse of those in the removal procedure, with attention given to
the following points:
(1)
Install desiccant cartridge in accordance with instructions supplied with cartridge.
(2)
Thoroughly clean and inspect drier assembly and end cover for corrosion, pitting, and cracks. Replace any
damaged components. Minor corrosion or pitting of exterior of components may be repaired.
(3)
Ensure all fittings are tightened in correct sequence.
c. Follow-On Maintenance.
END OF TASK
Change 1