TM 5-2420-230-24-1
Disassembly:
4.
Remove the rubber boot from the sector shaft,
and retain for reassembly (Figure 20).
Figure 20
5.
Remove the dirt shield from the frame side of
the sector shaft. A screwdriver or gasket
scraper can be used to shear the old dirt shield
from the housing (Figure 21).
NOTE:
It may be necessary to loosen the steering gear
mounting bolts to gain access to the frame side
dirt shield.
Figure 21
6.
Remove the sector shaft cover. Carefully sepa-
rate the sector shaft cover from the housing.
(Figure 22).
Use the appropriate tools to remove the sector
shaft cover style you are working on. An ap-
propriate size socket or snap ring pliers are
recommended.
Figure 22
K-36