Crankshaft - Removal (0-65)
Section 0 - Engine Disassembly and Assembly - Group 00
B Series Shop Manual
Remove the main bearing caps.
Do not pry on the main caps to free them from the cylinder
Use two of the main cap bolts to ``wiggle'' the main cap
loose, being careful not to damage the bolt threads.
4 Cylinder - 36 Kg [80 lb]
6 Cylinder - 55 Kg [123 lb]
Lift the crankshaft and gear from the cylinder block.
NOTE: Refer to Component Section 1 for disassembly and
Remove the main bearings from the cylinder block and
the main caps.
3/16 Inch Pin Punch
Remove the piston cooling nozzles.