TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Piston and Rod Assemblies - Installation (0-72)
B Series Shop Manual
Page 0-51
Lubricate the rings and piston skirts with clean engine oil.
Position the rings.
NOTE: Refer to component section 01 for installation of rings
Caution: If using a strap type ring compressor, make
sure the inside end of the strap does not hook on a ring
gap and break the ring.
Compress the rings.
Lubricate the cylinder bore with clean engine oil.
L-140