Balancer - Installation (0-79)
Section 0 - Engine Disassembly and Assembly - Group 00
B Series Shop Manual
The idler gear can be slightly rotated to help in alignment.
Lubricate the main bearing capscrew threads and the
underside of the capscrew heads with clean engine oil.
If the capscrews do not install freely, check to be sure the
engine has a piston at TDC.
Tighten the capscrews evenly and follow the illustrated
60 N·m [ 44 ft-lb]
119 N·m [ 88 ft-lb]
176 N·m [130 ft-lb]