TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Fuel Lines - Installation (0-108)
B Series Shop Manual
Page 0-101
Aftercooler - Installation (0-107)
3375066, 3823494 Sealant
Apply sealant, Part No. 3375066, to the capscrews as
shown in the illustration.
Apply a 4 mm bead of sealant, Part No. 3823494, around
the sealing surface of the aftercooler as shown in the
illustration.
Install the aftercooler. Do not tighten the capscrews until
the high pressure fuel line brackets are installed.
Fuel Lines - Installation (0-108)
17 mm
Install the fuel filter supply line.
The banjo fittings at the filter head require sealing wash-
ers on each side of the line. The banjo fitting with the vent
screw is used to install the pump supply line.
Injection Pump Supply Line - Installation
(0-109)
17 and 14 mm
Install the Bosch injection pump supply line.
17 and 14 mm
Install the injection pump fuel supply line for the CAV or
Stanadyne injection pump.