Section 1 - Cylinder Block - Group 1
Expansion and Pipe Plug - Installation (1-06)
B Series Shop Manual
Drive all expansion plugs in until the outer edge is flush
with the counter sink in the block.
Refer to procedure (1-07) for camshaft expansion plug
Apply a film of pipe plug sealant, Part No. 3375066, or
equivalent, to the threads.
Install and tighten the pipe plugs.
Refer to the following chart for torque values.
Tighten pipe plugs to the appropriate torque values.
Driver Part No. 3823524 (Coolant Passages), Part
No. 3823520 (Oil Rifle)
Expansion plug locations. Front of block.
1. Expansion Plug Part No. 3900965 (58.06 mm)
2. Expansion Plug Part No. 3900956 (17.73 mm)