Section V - Engine Component Specifications - Group 18
Component Specifications and Torque Values
Component or Assembly (Procedure)
Index line out of alignment
Missing rubber member chunks
Valve Stem to Rocker Lever Clearances
Valve Adjustment Procedure
Perform Step A of the valve set procedure with cylinder No. 1 at TDC compression stroke (timing
pin will engage).
Step A - Four Cylinder
Step A - Six Cylinder
Perform Step B of the valve set procedure with cylinder No. 1 at TDC plus 360 degrees (timing pin
will not engage).
Mark the crankshaft and gear cover. Rotate the crankshaft one full turn in the direction of engine
Step B - Four Cylinder
Step B - Six Cylinder