Fuel Injection Pump, Rotary (005-014)
B3.9 and B5.9 Series Engines
Section 5 - Fuel System - Group 05
8-mm Allen Wrench or 10-mm Hex
The special washer on the Bosch VE injection pump must
be removed so the lock screw can be tightened against the
NOTE: Wire the washer to the pump.
75 mm T-Bar
Pull the fuel injection pump drive gear loose from the pump
Do not drop drive gear key when removing the pump.
Failure to do so can result in severe engine damage.
Remove the three mounting nuts, and take off the fuel
Remove the gasket, and clean the surface.