TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
A/C Cylinder Head (QE Models) (012-104)
Section 12 - Compressed Air System - Group 12
Page 12-49
Install the head gasket onto the guide pins (either side up,
but with correct slot orientation). Install the head onto the
guide pins with the kidney-shaped slots aligned and toward
the valve plate. Install the cover gasket over the guide pins.
Assemble the cover.
Install the shorter capscrew with washer, if initially installed,
through the center hole.
[124 in-lb]
Place the remaining two guide pins in the crankcase head
capscrew holes (that will not interfere with the guide pins
already in the head assembly).
Install the valve plate gasket.
L-1253