CONTROLS AND INDICATORS INSIDE CAB CONTINUED
ABS system warning indicator and test
The ABS warning light illuminates when the ignition is turned on.
The light stays on while the system self-tests, then goes out. To test
the warning light operation, press in the bottom of the switch. The
light will illuminate while the switch is held. If the switch lights up
while driving, it indicates a system fault with the ABS. Report the
fault as soon as possible.
If the battery has been disconnected and then re-
connected, the light will come on when the
ignition is turned on, and will stay on until the
machine s road speed exceeds 3 mph (5 kph).
Rear horn switch
Used to sound the front and rear horn when operating the backhoe.
Used to enable the auxiliary hydraulics detent function. Also enables
the loader auxiliary emergency cut-off switch (pg. 0004-2, Item 10).
Hand throttle control lever
Used to control the engine speed when operating the backhoe.
Key switch to turn on the ignition and to start and stop the machine.