MILITARY LIGHT SWITCH ASSEMBLY - DIGITAL CONTINUED
Mode Selection (Primary)
Press the desired mode/function key. The selected mode/function key and the enter key LED indicators will flash.
Press the ENTER key.
If the ENTER key is not pressed within 5 seconds of the required mode key being pressed, the
switch will automatically reset to the previous mode. This prevents accidental switching.
The desired function will be selected. Confirmation of this is by way of the "blue" function active LED, which will be lit
and emitting a steady light.
If no blue function active LED is illuminated, then no external vehicle lights are turned on. The
Mode Selection (Secondary)
Press the desired mode/function key. If a primary mode has already been selected, and the desired selection is NOT the
currently selected secondary mode, the desired function will be operated and the blue indicator LED will be lit and emit-
ting a steady light.
To change the secondary function, press the mode/function key for a different secondary mode to the one which is cur-
rently selected. The desired function will be selected. Confirmation of this is by way of the blue function active LED,
which will be lit and emitting a steady light. (For example, with the panel light on bright and the indicator light for
"PANEL BRT" illuminated, to select panel light dim, press the "PANEL DIM" mode/function key. The panel lights will
dim and the "PANEL DIM" blue indicator light will illuminate.)
Turn Off Mode Selection (Secondary)
To turn OFF the panel lights, reselect the present secondary mode (as indicated by the function active LED).
The function active LED will extinguish, and the panel lights will go out.
Turn OFF the Switch
Press the ALL OFF key.
Press the ENTER key. The switch will turn off after 20 seconds.