EMS INSTRUMENT CLUSTER CONTINUED
Seat Belt Warning
The operator and passenger seats are each fitted with two electrical sensors. One sensor detects the weight of a person (or
object) on the seat; the second senses when the seat belt is fastened. When the engine is running and the seat belt(s) is/are NOT
fastened correctly, the EMS will scroll the following messages; (a) for driver only, "BELT DRIVER, (b) passenger only
"BELTS PASSENGER," (c) if both driver s and passenger s belts are not fastened, "FASTEN BELTS." The warning buzzer
and the warning light (Figure 37, Item 8) will be activated. The buzzer can be canceled by pressing the OK button (Figure 37,
Item 5). If the condition repeats, i.e., seat belt ON or seat belt OFF, then the buzzer will sound again.
The seat "person present" sensor will operate if any item heavy enough to be detected by the switch
is placed on either seat. To extinguish the warning, either remove the object from the seat or fasten
the belt around it.
Figure 37. Seat Belt Warning