Table 5. Lubrication Instructions - Continued.
Front Quick-Hitch, Crowd Ram, and Clamshell Bucket Lubrication
You will be working close to and inside the machine for these jobs. Lower the work tools if
possible. Select the Maintenance Suspension Mode (WP 0004). Turn OFF the battery disconnect
switch. This will prevent the engine from being started. Ensure the parking brake is engaged. If
you must work with the loader arms raised, the cylinder support struts must be fitted (WP 0021).
Failure to follow this warning may lead to injury or death to personnel.
Lubricate the front quick-hitch and crowd cylinder with GAA through the 14 fittings until grease is visible. Wipe excess
grease with Rag, Wiping (Item 18, WP 0033). Lubrication fitting 14 is on the opposite side of the machine.
Figure 8. Quick-Hitch