Table 5. Lubricating Instructions - Continued.
You will be working close to and inside the machine for these jobs. Lower the work tools if
possible. Select the Maintenance Suspension Mode (WP 0004). Turn OFF the battery disconnect
switch. This will prevent the engine from being started. Ensure the parking brake is engaged. If
you must work with the loader arms raised, the cylinder support struts must be fitted (WP 0021).
Failure to follow this warning may lead to injury or death to personnel.
Park the machine on level ground.
Engage the parking brake.
Lower the work tools to the ground.
The grease points are located on the side of the strut bearing housing. In some cases they are
pointed inward towards the chassis.
Lubricate the suspension strut upper and lower bearings with GAA through the eight fittings (two on each strut) until
grease is visible. Wipe excess grease with Rag, Wiping (Item 18, WP 0033).
Figure 18. Suspension Strut Bearings