RETURN MACHINE TO OPERATIONAL CONFIGURATION
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure any lifting device used is in good condition and of lifting capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
injury or death to personnel.
To return the machine to operational configuration is a reversal of the Configure Machine for Air Transport procedure;
however, note the following:
All fittings requiring torque tightening MUST have the correct torques applied to them.
Carry out all PMCS checks BEFORE using the machine.
Inspect machine to ensure it is operational.
Stow all BII that was used in correct stowage locations (Table 2, WP 0031).
END OF TASK
END OF WORK PACKAGE