UNLOADING MACHINE FROM TRAILER
CAUTION: Prevent possible injury from
unexpected machine movement. Turn auto-idle
switch off and turn H/P mode switch off when
loading or unloading the machine.
1. Turn auto-idle switch off, turn H/P mode switch off, and
move propel speed switch to slow speed.
CAUTION: Prevent possible injury from machine
tipping while upperstructure is rotating. Keep
arm tucked under and rotate upperstructure
slowly for best stability.
2. Raise bucket slightly off trailer. Keeping arm tucked
under, slowly rotate upperstructure 180°.
IMPORTANT: Prevent possible damage to front-end
attachment. Always position arm at 90°
to boom when unloading machine.
Unloading machine with arm tucked
may cause machine damage.
3. To move machine over end of trailer onto ramp,
position bucket on ground with flat surface of bucket
resting on ground. Angle (A) of arm to boom should be
Continued on next page