PROPEL MOTOR AND BRAKE START-UP
IMPORTANT: Propel motor will be damaged if not
filled with oil before starting engine.
Procedure must be performed whenever
a new propel motor is installed or oil
has been drained from the motor.
1. Disconnect motor drain line (A). Install plug such as
JT03221 (3/4-16 M 37°) (Parker No. 03CP--8) Plug.
2. Fill motor with hydraulic oil until oil reaches the top of
the drain port. (See Hydraulic Oil in Group 0004.) Use
a funnel with suitable diameter neck to allow air to
escape while filling.
3. Connect drain line.