MOUNT ENGINE ON REPAIR STAND
CAUTION: NEVER remove the overhead lifting
equipment until the engine is securely mounted
onto the repair stand and all mounting
hardware is tightened to specified torque.
Always release the overhead lifting equipment
On engines equipped with a low-profile turbocharger,
remove turbocharger before attaching engine to repair
On engines with a left-hand oil fill tube, remove tube
before mounting engine to repair stand.
NOTE: See next module for illustration of an engine that
has been mounted on repair stand.
Mount the engine to 628351 Engine Adapter as described
below. A label (H) is affixed to the engine adapter for aid
in explaining spacer used for each engine model.
NOTE: No. 2216681 Spacer (G) is used on the outside of
the engine adapter for the 4045 Engines and on
the inside (next to engine) on 6068 Engines.
Hole A--(2) No. 2144901 (M12 x 1.75 x 35 mm)
Hole B--(1) No. 2216641 (M14 x 2.00 x 35 mm)
Hole C--(1) No. 2216651 (M14 x 2.00 x 60 mm) with No.
Hole D-- (2) No. 2144901 (M12 x 1.75 x 35 mm)
Hole E--(1) No. 2216641 (M14 x 2.00 x 35 mm)
Part of JT07268 Engine Adapter Kit
Continued on next page