Cylinder Block, Liners, Pistons and Rods
CAUTION: Always follow manufacturer's
instructions, and safety steps exactly.
1. Clean piston ring grooves using a piston ring groove
IMPORTANT: When washing pistons, always use a
stiff bristle brush--NOT A WIRE
BRUSH--to loosen carbon residue. DO
NOT bead blast ring groove areas.
2. Clean pistons by any of the following methods:
· Immersion-Solvent "D-Part".
· Hydra-Jet Rinse Gun.
· Hot water with liquid detergent soap.
If cleaning with hot water and liquid detergent, soak
pistons in a 50 percent solution of liquid household
detergent and hot water for 30 to 60 minutes. Use a
stiff bristle brush--NOT A WIRE BRUSH--to loosen
carbon residue. Dry with compressed air.