Wiring Harness and Switches
DISCONNECTING SPRING WIRE RETAINER
1. Grasp connector halves; move half of connector from
side-to-side as it's being pulled apart. Wire retainer will
slide over retaining tabs. Do not pull on wiring leads.
2. To reconnect, push together until wire retainer "clicks"
DISCONNECTING TAB RETAINER
IMPORTANT: Do not disconnect electrical connectors
while the engine is running. Damage to
engine and pump controller or other
components may result. Disconnect
connectors only when instructed during
a test or check.
1. Push retainer tab (A).
2. Hold tab and pull connector halves apart; do not pull
on wiring leads.