TM 5-3805-280-24-2
22
1--Cap Screw (4 used)
8--Cap Screw (2 used)
15--Clamp (2 used)
22--Nipple
11
2--Nut (4 used)
9--Barbed Fitting
16--Stud (4 used)
23--Tee
3--Air Assembly Cleaner
10--Gasket
17--Gasket
4--Cap Screw (2 used)
11--Unloader Inlet
18--Tubing
25--Adapter
5--Nut (4 used)
12--Cap Screw (4 used)
19--Adapter
26--Hose
6--Unloader Assembly
13--Hose
20--Hose
7--Air Cleaner Bracket
14--Clamp
21--Adapter
12. Install gasket (17).
CAUTION: Purge the system of all air
pressure.
13. Install unloader assembly (6) and nuts (5).
1. Loosen clamp (14) and disconnect hose (13).
14. Install adapter (25).
2. Remove cap screws (1) and nuts (2). Set air
15. Install parts (21--24).
assembly cleaner (3) aside.
16. Connect hoses (20 and 26).
3. Remove cap screws (4 and 8). Set air cleaner
bracket (7) aside.
17. Install gasket (10), unloader inlet (11) and four cap
screws (12).
4. Loosen two clamps (15) and remove tubing (18).
18. Install barbed fitting (9) and adapter (19).
5. Remove adapter (19) and barbed fitting (9).
19. Install tubing (18) and tighten two clamps (15).
6. Remove cap screws (12), unloader inlet (11) and
gasket (10).
20. Install air cleaner bracket (7) on top of unloader
valve assembly. Install cap screws (4 and 8).
7. Disconnect hoses (20 and 26).
21. Install air assembly cleaners (3), cap screws (1)
8. Remove parts (21--24).
and nuts (2).
9. Remove adapter (25).
22. Connect hose (13) and tighten clamp (14).
10. Remove nuts (5) and unloader assembly (6).
11. Repair and replace parts as necessary.
CED,OUOE039,19 1915APR992/2
20-9