REMOVE AND INSTALL HYDRAULIC OIL
CAUTION: The hydraulic oil tank is pressurized.
High pressure release of oil from pressurized
system can cause serious burns or penetrating
injury. Release pressure from tank by loosening
vent plug. It is not necessary to remove vent
1. Loosen vent plug (A) to release air pressure in
hydraulic oil tank.
2. Remove covers from the bottom and side of hydraulic
NOTE: It is not necessary to drain and remove the
hydraulic oil tank if only the return filter element is
being removed. (See procedures in this group.)
3. Drain hydraulic oil tank. Approximate oil capacity is 148
L (39 gal).
Continued on next page