TM 5-3805-280-24-2
Hydraulic System
1--Cylinder Barrel and
7--U-Cup Seal
18--Wear Ring
31--Clamp
Bushing
8--Backup Ring
19--Shim
32--Clamp
1A--Cylinder Barrel
9--Wiper Seal
20--Nut
33--Cap Screw (2 used)
1B--Bushing (2 used)
10--O-Ring
21--Set Screw
34--Lock Washer (2 used)
2--Rod and Bushing
11--Backup Ring
22--Steel Ball
35--Clamp
2A--Rod
12--Cap Screw (12 used)
24--Dust Seal (2 used)
36--Cap Screw
2B--Bushing (2 used)
13--Cushion
26--Dust Seal (2 used)
37--Lock Washer
3--Rod Guide
14--Piston
27--Elbow Fitting
38--Lubrication Fitting
4--Wear Ring
15--Cap Seal and O-Ring
28--Rod End Line
5--Snap Ring
16--Backup Ring (2 used)
29--O-Ring (2 used)
6--Buffer Ring Seal
17--Buffer Seal (2 used)
30--Cap Screw (8 used)
NOTE: Use a cylinder repair kit when assembling a
1. Install bushing (1B and 2B) to a depth equal to the
rebuildable cylinder.
thickness of dust seals.
The left and right boom cylinders are the same
2. Install dust seals tight against bushing with seal lip
except for the head (26) and rod (27) end
outward. (See Remove and Install Bushings and
lines, and clamps (32 and 33).
Seals in Group 3340.)
Continued on next page
TX,33,UU3814
1907JAN976/17
33
3360
171
21-203