TM 5-3805-280-24-2
Rock Drill
44
DISASSEMBLE AND ASSEMBLE CROSS-TILTING CYLINDER
9506
120
1--Screw (2 used)
5--Swivel (2 used)
8--Rod
12--Rod Stop
2--Grease Fitting
6--Plug (2 used)
9--Lining
13--Cylinder
3--Grease Fitting
7--Hydraulic Valve (2
10--Piston
4--Snap Ring (4 used)
used)
11--Screw
9. Install rod stop (12), screw (11), piston (10), lining
1. Remove two screws (1).
(9), and rod (8).
2. Remove grease fitting (2).
10. Install two hydraulic valves (7).
3. Remove grease fitting (3).
11. Install two plugs (6).
4. Remove four snap rings (4), and two swivels (5).
12. Install two swivels (5), and four snap rings (4).
5. Remove two plugs (6).
13. Install grease fitting (3).
6. Remove two hydraulic valves (7).
14. Install grease fitting (2).
7. Remove rod (8), lining (9), piston (10), screw (11),
15. Install two screws (1).
and rod stop (12).
8. Inspect, repair or replace parts as necessary.
CED,OUOE019,23 1926MAY991/1
23-111