15. Pull injection pump lever rapidly to fast idle and then
decelerate to slow idle. Slow idle must be to
NOTE: Injection pump shown removed for clarity of
Turning the supplementary idle screw (H) in no more
than 1/4 of a turn may help to reduce surging or
hunting. If surging or hunting continues, repair
16. Stop the engine.
17. Connect the cable to lever.
Check that the threaded portion of cable in centered
in bulkhead bracket. Loosen and tighten the nuts to
centered threaded portion of cable in bulkhead
bracket. Cable can be adjusted in the bulkhead
bracket if more cable travel is need in one direction.
18. Do Engine Control Motor Adjustment and then the
Engine Speed Learning Procedure. (See procedures
in this group.)
G--Internal Slow Idle Stop
H--Supplementary Idle Screw