A--Fuse (Power Side)
B--Fuse (Circuit Side)
between fuse and switch. Inspect wire harness for
burned areas or insulation rubbed off a wire.
4. If continuity is not measured, measure continuity to
1. A grounded circuit results in no component
frame ground, between switch terminal (D) and
component terminal (G).
2. Troubleshoot a grounded circuit by turning the
between switch and component. Inspect wire
switch OFF, and checking continuity to frame
harness for burned areas or insulation rubbed off a
ground between the fuse circuit side (B) and switch
Continued on next page