TM 5-3805-281-24-1
Hydraulic System
02--Motor Shaft and Brake
19--Center Shaft
33--O-Ring
55--Piston Seal (2 used)
Housing
20--Spring
34--O-Ring
57--O-Ring
04--Motor Drive Shaft
21--Pin
37--Motor Valve Housing
60--Plug
06--Roller Bearing
22--Retaining Ring
38--Cap Screw (4 used)
61--O-Ring
07--Roller Bearing
24--Disk (4 used)
40--Plate
62--Plug
08--Spacer
25--Plate (5 used)
45--Valve Plate
63--O-Ring
09--Nut
26--Spacer
46--Bushing
64--Cover
11--Lip Seal
28--Piston
48--Link
65--Cap Screw (4 used)
12--Snap Ring
29--O-Ring
49--Pivot Plug (2 used)
14--Rotor
30--O-Ring
51--Shoulder Bolt
17--Piston (7 used)
31--Disk Spring
53--Servo Piston
02
0260
15
CED,OUOE023,174 1901JUN982/14
1. Install bushing (B) using disk drivers, until bushing is
even with valve plate (C).
2. If removed, apply thread lock and sealer (high
strength) to threads of pivot plugs (A). DO NOT allow
thread lock and sealer on the smooth portion of the
pivot plugs.
3. Install valve plate and pivot plugs (A) in link. Tighten
pivot plugs.
Pivot Plug--Specification
Torque ............................................................................. 49 Nm (36 lb-ft)
A--Pivot Plug (2 used)
B--Bushing
C--Valve Plate
Continued on next page
CED,OUOE023,174 1901JUN983/14
10-54