MOUNT ENGINE ON REPAIR STAND
Mounting Engine on Repair Stand
1. Mount the starter side of the engine to the engine
CAUTION: NEVER remove the overhead
adapter with four SAE Grade 8 (or higher grade)
lifting equipment until the engine is securely
5/8-11 UNC x 3-3/4 in. flanged-head cap screws.
mounted onto the repair stand and all
mounting hardware is tightened to specified
2. Tighten cap screws to 203 N·m (150 lb-ft).
torque. Always release the overhead lifting
3. Carefully remove lift sling from engine.
NOTE: If starting motor is to be removed from engine,
To remove engine from repair stand, reverse the
remove before mounting engine onto repair
Continued on next page