IMPORTANT: Immerse parts in clean fuel before
assembly. DO NOT dry parts with
towels or compressed air. Dust
particles might collect and stay on
pressure faces of nozzle valve and
1. Place shims (A), spring (B), and spring seat (C) in
nozzle holder (D) while still wet with diesel fuel.
NOTE: Make sure intermediate plate (E) is free of any
foreign material before reassembling.
Assembling Nozzle Holder Parts
2. Position intermediate plate (A) on nozzle holder (B).
Dowel pins (C) in plate will permit installation only one
3. Insert nozzle valve into nozzle (D) while holding parts
below diesel fuel level in pan.
Assembling Nozzle Valve Parts
D--Nozzle and Valve
Continued on next page