Instruments and Indicators
REMOVE AND INSTALL HOUR METER
1. Remove bottom panel.
2. Remove connector (C).
3. Remove screws (A and B). Remove hour meter.
4. Repair or replace parts as required.
5. Install hour meter.
6. Install bottom panel.
CHANGING PROPEL ALARM VOLUME
IMPORTANT: It may be necessary to adjust propel
alarm volume to meet local regulations.
NOTE: Alarm removed from machine for clarity.
1. Remove four sheet metal screws to remove propel
alarm front cover.
NOTE: This machine is shipped with the propel alarm set
in the "High" position.
2. Adjust volume level of propel alarm by connecting
metallic bar to appropriate terminals. The alarm can be
set at "LOW", "MED" (medium), or "HIGH" volume
3. Install front cover.