TM 5-3805-281-24-2
Removal and Installation
Tighten cap screws.
13. Repair or replace parts as necessary.
Cab-to-Platform Cap Screw--Specification
Lift each corner of platform to remove and install
rubber mounts (1).
Torque....................................................................... 64 Nm (47 lb-ft)
Tighten cap screw (2).
Tighten lock nuts (6).
Rubber Mount-to-Frame Cap Screw--Specification
Cab and Platform-to-Rubber Mount Lock Nut--Specification
Torque..................................................................... 108 Nm (80 lb-ft)
Torque................................................................... 205 Nm (152 lb-ft)
14. Before installing cab, check that all lines and
wiring harnesses are out of the way so they are
not pinched when cab is installed.
15. Install cap screw (9) with hex head at front and left
side. Install cap screw (7) with socket head at rear
and right side.
CED,OUOE027,244
1918MAY986/6
18
1800
5
17-5