TM 5-3805-281-24-2
Buckets
1--Quick-Latch Frame
7--Spring Mounting
12--Lock Washer (2 used)
19--Handle Assembly
Assembly
Bracket
13--Nut (2 used)
20--Roll Pin
2--Grease Fitting
8--Cylinder Mounting
14--Hose Clamp
21--Decal
33
3--Wedge Bar
Bracket
15--Cover Plate
22--Cover
3302
4--Spring
9--Elbow
16--Cap Screw
23--Cap Screw (4 used)
15
5--Hydraulic Cylinder
10--Pin Assembly
17--Spring
24--Lock Washer (4 used)
6--Cap Screw (2 used)
11--Cap Screw (2 used)
18--Pin
25--Cap Screw (2 used)
5. Remove hydraulic cylinder (5).
IMPORTANT: The quick-disconnect hitch must be
in latch mode.
6. Block up pin (18) with a shim through slot in the
back plate of frame.
1. Remove cap screws (23), washers (24) and cover
(22).
7. Remove roll pin (20) and remove handle (19).
2. Remove cap screw (16), cover plate (15) and hose
clamp (14).
CAUTION: Assembly is under spring tension.
Remove shim carefully.
3. Slowly remove cap screws (6) and nuts (13) in
order to release tension of springs (4).
8. Slowly remove blocking shim and remove pin (18)
and spring (17).
4. Remove the cylinder rod mounting bracket (8),
wedge bar (3) and spring mounting bracket (7).
CED,OUOE042,5070 1916APR992/2
19-15