REMOVE AND INSTALL HYDRAULIC PUMP
CAUTION: The hydraulic oil tank is pressurized.
High pressure release of oil from pressurized
system can cause serious burns or penetrating
injury. Release pressure from tank by loosening
vent plug. It is not necessary to remove vent
NOTE: Procedure is the same for front or rear pumps.
1. Loosen vent plug (A) to release air pressure in
hydraulic oil tank.
2. Drain hydraulic oil tank. Approximate oil capacity is 159
L (42 gal).
3. Drain splitter drive. Approximate oil capacity is 1.0 L
Continued on next page