TM 5-2420-230-24-2
Section 9 - Drive Units - Group 9
Accessory Drive Adaptor - Assembly (9-04)
B Series Shop Manual
Page 9-5
1 inch Drift
Press the shaft and bearing assembly out of the gear.
1 inch Drift
Support the bearing assembly and press the shaft from
the bearing.
Accessory Drive Adaptor - Assembly
(9-04)
1.25 inch Pipe Coupling
Support the inner race of the new bearing and press the
shaft into the bearing until the shaft bottoms on the inner
race.
2 inch Pipe
Caution: Press on the outer race of the bearing assem-
bly. Pressing on the inner race will damage the bearing.
Support the housing and press the bearing and shaft
assembly in until it bottoms.
L-408