TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Fuel Manifold (Drain) (006-021)
Section 6 - Injectors and Fuel Lines - Group 06
Page 6-13
Inspect the fuel drain manifold banjo connections.
NOTE: The banjo connection seals must be discarded
when removed. The seals must not be used again.
Install (006-021-026)
Distributor-Type Pump
Assemble the fuel drain line and fuel drain manifold in the
reverse order of disassembly.
NOTE: Use new seals for the fittings.
The installation torque for the banjo fitting screw is as
follows:
Torque Value: 9 Nm
[80 in-lb]
NOTE: Use new sealing washers for the fuel drain manifold.
Install the clamp capscrews.
Torque Value: 24 Nm
[18 ft-lb]
L-983