TM 5-2420-230-24-2
Coolant Heater (008-011)
B3.9 and B5.9 Series Engines
Page 8-8
Section 8 - Cooling System - Group 08
Install (008-011-026)
Lubricate the new heater o-ring with clean lubricating en-
gine oil.
The locking channel (T-bar) should be threaded out to the
end of the bolt. If so equipped, do not remove the retaining
wire used to position the channel (T-bar).
Hook the element and one leg of the channel (T-bar) into
the hole as illustrated.
Hook the other leg of the channel in the hole, and push the
heater into the hole as far as possible by hand.
L-1064
