TM 5-2420-232-10
0017
Table 5. Lubrication Instructions - Continued.
Note 14.
Axle Swivels Lubricate
WARNING
You will be working close to and inside the machine for these jobs. Lower the work tools if
possible. Select the Maintenance Suspension Mode (WP 0004). Turn OFF the battery disconnect
switch. This will prevent the engine from being started. Ensure the parking brake is engaged. If
you must work with the loader arms raised, the cylinder support struts must be fitted (WP 0021).
Failure to follow this warning may lead to injury or death to personnel.
1.
Park the machine on level ground.
2.
Engage the parking brake.
3.
Select the Maintenance Suspension Mode (WP 0004).
4.
Lower the work tools to the ground.
NOTE
The right side front and left side rear grease fittings are hidden from direct view. Access the right
side front grease fittings from the front, looking from the front of the machine. Access the left
side rear grease fittings from the rear of the machine.
5.
Lubricate the axle swivels upper and lower bearings with GAA through the eight fittings (two on each swivel) until
grease is visible. Wipe excess grease with Rag, Wiping (Item 18, WP 0033).
435-A0351
Figure 21. Axles Swivels
017
0017-47
Change 1