TM 5-2420-232-10
0021
BACKHOE BUCKET CROWD CYLINDER STRUT REMOVAL
0021
1.
Crowd the backhoe bucket sufficiently to take the weight off the strut (WP 0004).
2.
Ensure the parking brake is engaged and the transmission is in Neutral (WP 0004).
3.
Stop the engine (WP 0005).
4.
Disconnect cable from connector (Figure 6, Item 9) and remove cable from loop (Figure 6, Item 8).
5.
Release latch and clamp (Figure 5, Item 7), then remove the strut (Figure 5, Item 6).
6.
Secure the strut (Figure 5, Item 6) in its stowage position on the spare wheel carrier.
END OF TASK
END OF WORK PACKAGE
0021-10
