TM 5-2420-232-10
0038
OPERATION
0038
1.
Observe all safety precautions.
2.
Install the appropriate adapter as required.
3.
Place the post driver foot firmly on the surface to be driven.
4.
Press the lever assembly (Figure 1, Item 1) on handle to start the post driver.
435-A1389
Figure 1. Post Driver
038
NOTE
On Remote ON/OFF Valve Models Place the post driver on/off control valve in the ON position to
start the post driver.
Adequate down pressure is very important.
5.
When the post is fully set in the ground, release the lever assembly on handle.
0038-3
