TM 5-3805-280-24-1
Lubricant
specifications
ROCK DRILL LUBRICANTS SPECIFICATIONS
We recommend the use of the MOBIL lubricants.
PNEUMATIC CIRCUIT
These are selected to get the best performances out
Anti wear oils for pneumatic equipment
of our equipments.
ISO VG 46 for : t 0C
If the MOBIL products are not available, our war-
ISO VG 100 for : t > 0C
ranty will apply only if high quality lubricants are used
according to the following specifications and under
Performances :
the responsability of your supplier.
film resistance
HYDRAULIC CIRCUIT
reinforced antiwear
anticorrosion
Oil ISO VG 32 (ISO VG 46 when 10C <t<45 C)
with stabilized antiwear additive
antifreeze (for : t OC)
Specifications :
Specifications :
Viscosity at 40C: 30 to 33 cSt (46 cSt)
Pour point <24 C
Viscosity index VI: 150
(140)
Flash point 218 C
Viscosity at 40 C: 150 cSt
Pour point: < 40C
Viscosity index Vi: 140
De airing: 5 mn
Performances :
GEAR BOX
Homologation: DENISON HFO
High pressure oil SAE 80 W 90 for transmissions.
Anti wear: FZG 12
Performances :
VICKERS 35 VQ 25 : total wear < 50 mg
specifications: MIL-PRF-2105E
ASTM D 130 : cotation 1 a
Anti corrosion: CINCINNATI P 70 pass
GREASE
Filterability: DENISON TP 02100 :
MIL-PRF-10924G
t < 200 seconds with water 2%
Oxydation stability NFT 60150 t > 2200 h
for 1 a 2 ASTM D 943
Performances :
specifications: MIL-PRF-2105E
1-39