TM 5-3805-280-24-1
Adjustments
R134A COMPONENT OIL CHARGE
amount of new oil of 230 20 mL (7.7 0.7 fl oz).
SPECIFICATIONS
230 20 mL (7.7 0.7 fl oz)
New Compressor Oil Capacity
New Compressor Oil--Specification
Amount Of New Oil Capacity
100 mL (3.4 fl oz)
330 20 mL (11.1 0.7 fl oz)
Capacity ................................................. 230 20 mL (7.7 0.7 fl oz)
Flushed Compressor New Oil
Capacity
New Compressor, Drained Oil
45 mL (1.5 fl oz)
System requires an additional amount of new oil of
Capacity
100 mL (3.4 fl oz) of new oil.
Used Compressor, Drained Oil
45 mL (1.5 fl oz)
Capacity
Amount Of New Oil--Specification
Evaporator Oil Charge
130 mL (4.4 fl oz)
Capacity .................................................................. 100 mL (3.4 fl oz)
Condenser Oil Charge
65 mL (2.2 fl oz)
Used compressor removed from operation, oil
Receiver-Dryer Oil Charge
30 mL (1.0 fl oz)
drained, and flushed requires 330 20 mL (11.1
Hoses Oil Charge
60 mL (2.0 fl oz) or 3 mL per
0.7 fl oz) of new oil.
30 cm (0.1 fl oz per ft)
Hoses Approximate Total
600 cm (20 ft)
Length
Flushed Compressor New Oil--Specification
Capacity ............................................... 330 20 mL (11.1 0.7 fl oz)
CAUTION: All new compressors are charged
with a mixture of nitrogen, R134a refrigerant
and TY22025 (R134a) refrigerant oil. Wear
2. When the complete system was not flushed add the
safety goggles and discharge the
correct amount of oil for the compressor plus
compressor slowly to avoid possible injury.
amount of oil for each component that was
serviced.
Compressors can be divided into three categories
New compressor from parts depot, drain and
when determining the correct oil charge for the system.
return 45 mL (1.5 fl oz) of oil to the compressor.
New compressor from parts depot
Used compressor removed from operation
New Compressor, Drained Oil--Specification
Compressor internally washed with flushing solvent
9031
Capacity .................................................................... 45 mL (1.5 fl oz)
20
Determining the amount of system oil charge prior to
3
(See Compressor Oil Removal procedure in this
installation of compressor on a machine.
group)
1. When the complete system, lines, and components
were flushed add the correct amount of oil as
described.
New compressor from parts depot contains the
Continued on next page
CED,TX14795,4338 1904MAR981/2
7-24
