TM 5-3805-281-10
Operating the Machine
QUICK-DISCONNECT ATTACHMENT REMOVAL
1. Fully extend arm and curl bucket in. Place the
attachment on the ground.
2. Manually lift and rotate the safety lock pin lever from its
locked position and install it in the unlocked position
(F).
NOTE: Alarm will sound when switch is in unlocked
position.
3. To unlatch the Quick-Disconnect Hitch from an
attachment fully extend the bucket cylinder. Move the
Quick-Disconnect Hitch switch (A) in the operators cab
to the unlatch position. Move the control to extend the
bucket cylinder again to place hydraulic oil over relief.
This will activate the latch cylinder to the open position.
CED,OUOE042,66 1909DEC996/8
4. Operate the excavator to rotate the Quick-Disconnect
Hitch in the vertical position (G).
Continued on next page
CED,OUOE042,66 1909DEC997/8
7-17
