TM 5-3805-281-10
Maintenance--Every 10 Hours or Daily
12. Insert 4mm (0.15 in.) hex wrench (D) into hole (E)
and turn counterclockwise.
13. Slowly turn cap (A) counterclockwise. Remove cap.
14. Add oil. (See Fuels and Lubricants chapter.)
15. Install cap to case assembly (C) by aligning marks (B)
and turning cap clockwise to lock position.
A--Cap
B--Aligning Marks
C--Case Assembly
D--Hex Wrench
E--Hole
Continued on next page
TX,60,DH5096
1908JUL964/5
12-5
