TM 5-3805-281-24-2
Hydraulic System
CAUTION: To avoid injury from escaping fluid
under pressure, stop engine and relieve the
33
pressure in the system before disconnecting
3360
hydraulic or other lines. Tighten all connections
96
before applying pressure.
3. Disconnect lines (3--64). Install caps and plugs.
TX,33,GG2561
1912MAR978/9
CAUTION: The approximate weight of control
valve is 240 kg (529 lb).
Control Valve--Specification
Weight............................................................ 240 kg (529 lb) approximate
4. Remove control valve (A).
5. Repair or replace parts as necessary.
6. Install control valve (A).
7. Tighten cap screws (C).
Mounting Bracket-to-Valve Housing Cap Screw--Specification
Torque ......................................................................... 205 Nm (151 lb-ft)
8. Check oil level in the hydraulic oil tank. Add oil as
necessary. (See Hydraulic Oil in Group 0004.)
9. Do the Hydraulic Pump Start-Up Procedure. (See
procedure in this group.)
A--Control Valve
B--Right Side Support Bracket
C--Washer (4 used)
D--Cap Screw (4 used)
E--Left Side Support Bracket
TX,33,GG2561
1912MAR979/9
19-129
