TM 5-3805-281-24-2
Hydraulic System
Lower Pilot Caps-to-Control Valve Housing Cap Screw--
Special Cap Screw-to-Spool--Specification
Specification
Torque....................................................................... 16 Nm (12 lb-ft)
33
Torque....................................................................... 29 Nm (21 lb-ft)
3360
106
Install spools (16--20 and 32--36).
Clean threads of special cap screws (41 and 46) using
cure primer. Apply thread lock and sealer (high
Install pilot caps (10 and 14). Tighten cap screws (12).
strength) to threads of cap screws.
Upper Pilot Caps Cap Screw--Specification
Install spring seats, springs, stoppers and special cap
Torque....................................................................... 29 Nm (21 lb-ft)
screws on the respective spools. Tighten special cap
screws.
Continued on next page
CED,OUOE026,13 1919JUN989/21
19-138