TM 5-3805-281-24-2
Hydraulic Impact Breaker
33
6. Place accumulator screws (A) in holes on sides of the
19
cylinder (C). Extract cylinder (C) from chuck housing
(B).
7. Check inside of cylinder for scoring and defects. Hone
out defects in cylinder walls with appropriate, lubricated
tool [recommended: BRM Flex-Hone]. If cylinder is
honed, clean with warm, soapy water then re-oil.
Replace cylinder if necessary.
A--Accumulator Screw
B--Chuck Housing
C--Cylinder
Continued on next page
CED,OUOE039,1 1920MAR9924/42
20-18
