TM 5-3805-281-24-2
Hydraulic Impact Breaker
33
8. Using a press, extract chuck bush by pressing on
26
welded disc.
CED,OUOE039,1 1920MAR9933/42
DISASSEMBLE HIGH AND LOW PRESSURE LINKS
1. Disassemble seeger/snap ring (A) with pliers and
remove washer (B).
2. Slide H.P. connection (E) off link (C). Check condition
of O-ring (D) and mortising areas. Clean O-rings and
replace as needed.
3. Remove plug (F) and sealing washer (G).
A--Seeger/Snap Ring
B--Washer
C--Link
D--O-Ring
E--H.P. Connection 1 in.
F--Plug 1/4 in. Gas
G--Sealing Washer
Continued on next page
CED,OUOE039,1 1920MAR9934/42
20-24