TM 5-3805-281-24-2
Hydraulic Impact Breaker
33
ASSEMBLE CYLINDER
39
1. Insert two accumulator screws (A) in sides of cylinder
(B), as shown. Use suitable lifting device to suspend
cylinder.
NOTE: Be sure that the seals are assembled back-to
back, with the lips on the outer sides.
2. Assemble U-joint seals (C) into internal grooves of
cylinder (B).
A--Accumulator Screw
B--Cylinder
C--U-Joint Seal
CED,OUOE039,6 1920MAR9912/37
3. Insert locator pin into lower chuck housing.
Continued on next page
CED,OUOE039,6 1920MAR9913/37
20-36
