TM 5-3805-280-24-2
Rock Drill
44
9506
1--Screw
7--Joint (2 used)
13--Elastic Pin (2 used)
19--Spacer Ring (3 used)
91
2--Bolt
8--Ring (2 used )
14--Spacer
20--Screw (3 used)
3--Screw (4 used)
9--Pulley
15--Screw (2 used)
21--Cradle Spacer
4--Shield
10--Oiler
16--Chain Guide
5--Hoses Guide (2 used)
11--Screw
17--Shim
6--Ring
12--Shaft
18--Hoses Winder Cradle
131. Install three spacer rings (19), and screws (20).
120. Remove screw (1).
132. Install chain guide (16), shim (17), two screws
121. Remove bolt (2).
(15), and hoses winder cradle (18).
122. Remove four screws (3).
133. Install oiler (10).
123. Remove shield (4).
134. Install shaft (12), spacer (14), two elastic pins
(13), pulley (9), two rings (8), two joints (7), and
124. Remove two hoses guides (5).
ring (6).
125. Remove screw (11).
135. Install screw (11).
126. Remove ring (6), two joints (7), two rings (8),
136. Install two hoses guides (5).
pulley (9), two elastic pins (13), spacer (14), and
shaft (12).
137. Install shield (4).
127. Remove oiler (10).
138. Install four screws (3).
128. Remove two screws (15), chain guide (16), shim
139. Install bolt (2).
(17), and hoses winder cradle (18).
140. Install screw (1).
129. Remove three screws (20), and spacer rings
(19).
130. Inspect, repair or replace parts as necessary.
Continued on next page
CED,OUOE019,11 1923MAR9911/22
23-84